I haven’t posted in a week? Poor blogging, Selene!
Ok as promised, I wanted to post about what our day-to-day life has been like out here. Amazingly, today is our last day! I am on shore right now, making small adjustments to glider that we will pick up at noon. The rest of the team is out picking up the DASBRs and QUEphone. They will come in, we will unload gear, then go back out to get the glider.
After almost two weeks of going out everyday, we got the system down pretty well. We got stronger, and faster, and spirits remained high throughout!
Days start early – up around 5 am, for a 5:30 departure. 3 of the crew went out each day, because there wasn’t really room on the boat for 4 + all the gear, and that way we had a person on land who could give us instrument locations if we had trouble finding them.
Our main objective was to pick up all our floating/drifting recorders, and move them back up current (to the southwest) so they could drift over our moored instruments, and along the glider path, again over 24 hours.
We started each morning with an empty deck (except for a few empty tubs where line goes).
It took about 1:15 to transit out to where the instruments were floating. We had GPS coordinates for about where they were, and then half of them also had these really awesome dog trackers attached to the mast. When we were within 3 miles, the handheld receiver would point us in the direction of that “dog”. They are made for hunting, so if the floats didn’t move very fast it would alert us that our “dog” had “treed a quarry.” That was always good for a laugh. Then, using those to get to the general area, we could use relative positions of the others to find them. Some days lighting was better than others, but we always found them eventually.
Once we found an instrument, we marked its recovery location, and started to pull line. This was the fun part 🙂 the DASBRs have a surface float, and then 100 m of line down to a weight. Near the bottom of that is the two hydrophones, and depending on the type of DASBR, somewhere in there is the recording device and batteries. We all decided on our favorite and least favorite types of line to pull, and we’d share the work so it never seemed that bad! Each one took about 15 min to recover.
Every other day we recovered the QUEphone as well. It was drifting at 500 m, where the currents were slower, so it took two days to pass the HARPs. For that, Haru would text us when it surfaced, at about 8:00, then we would go grab it. Easy peasy.
After everything was loaded in the boat, we would head down to our deployment location.
We made minor adjustments to the deployment location each day, after looking at the currents from the day before. Everything stayed in formation as best as we hoped…which was awesome! The formation is critical to us being able to localize the animals we record. Heading to the deployment location took about 30 mins, where we would then drive from point to point making a rectangle. Letting the line out was super fun (compared to pulling it). If we had the QUEphone we would chuck it (gently of course) into the water, and head back in, another 1:30 transit.
While we were out there we did our part to collect mylar balloons we encountered (Please think twice about purchasing them…they don’t break down for a VERY LONG TIME and all that shiny plastic and string can look like a tasty treat to marine life). We also collected water samples in the vicinity of animals, for our the Cetacean Conservation and Genetics Lab at OSU, for an eDNA project Holger is working on with them.
We usually got back to the lab in early afternoon, again with an empty deck. Afternoons were filled with looking at instrument paths, planning for the next day, starting to look at data, discussing science, celebrating the good news for the Vaquita, and sometimes taking naps 🙂
